Healthy Chemicals Your Spa Needs

Healthy Chemicals Your Spa Needs

The coming of spring might be too cold for you to use your swimming pool. The temperatures are, however, just right for relaxing in your spa. Yes, you can use an indoor spa even in the dead of winter, which makes it one of the most versatile elements you can have on your property. Building the spa, however, is only one part of the relaxation on your property. You should invest in its periodic maintenance to keep the spa’s water clean and safe for your use.

One element any SLC, UT bullfrog spas professionals will recommend for your property is the use of chemicals. This does not mean merely pouring the chemicals available in stores for pools and spas. It helps to understand what chemicals are needed and how they work in your spa. Moreover, you need an expert to determine the right amount of chemicals that will boost the safety of your spa rather than destroy its lining and cause grave health issues. The following are some of the essential chemicals for spa maintenance.


What keeps your pool clean and clear? Sanitizers.

The required amount of sanitizer depends on the volume of your tub and is measured in ppm {parts per million}. Must-have spa sanitizers include chlorine, bromine, and salt though in a few cases biguanide can be used. Keep your chlorine levels between 1-3ppm, bromine should be at 3-5ppm, and salt levels should ideally range from 2000-3000ppm.

Alkalinity and PH Decreasers

spa bath

Alkalinity is the primary element you should adjust every now and then. If the alkaline levels are too high, usually above 150ppm, the scale will start forming around your tub’s walls. Alkalinity decreasers are used to maintain the alkaline levels of your spa at 125-150ppm. Moreover, the PH of your spa should be neutral at 7.4-7.6. PH levels above 7.6 will cause your water to have a cloudy appearance.


Just like your body’s enzymes, spa enzymes are essential for your spa to break down the fats, starches, and proteins among other organic contaminants in your tub. These come from the leaves, body oils, skin cells, and insects that lurk in your spa waters. These elements disintegrate, leaving a scum layer on the spa. When left to accumulate, this scum makes it hard to see the floor of your tub and exposes you to microorganisms that cause skin rashes and other conditions.

Water Clarifiers

Most people assume this is all it takes to keep their spa’s water clear. Water clarifiers are, however, a temporary rather than maintenance measure. They will simply clear the cloudy water rather than address the underlying cause of the clouding. Once the effect of the clarifier wears off, your spa will become cloudy. Have a professional handle them to prevent contamination.

Spa chemicals are good for boosting the safety, durability, and look of your spa is to opt for the same company for the building and maintenance of your spa. If you want a relaxed day at the spa, invest in these spa must-haves ASAP.