The Culprits That Shoved Your Brake Pedal Too Far Down

All parts of your car play integral roles in making your driving experience as smooth as possible. The brake system is among the most important components, as your safety on the road greatly depends on it. As such, you should do everything to keep it at its peak condition; otherwise, you run the risk of getting into an accident that can cause serious injuries.

Keep in mind that many things that can go wrong with your brakes, such as the pedal going too far down. Working with a dependable and experienced brake repair specialist in Clearfield is important. It also pays to know about the possible causes of the problem, so you can keep it from becoming a constant headache. Here are some of them:

Letting your brake fluid run dry

This is a leading cause of pedals going so low that drivers have to put in extra effort in extending their foot just so they can step on it. The good news is that you can easily find out whether this is the culprit. You just have to check if you still have brake fluid, and then refill it if necessary. Use the marking – usually located at the side of the reservoir – as a guide when filling the gauge back up.

Allowing your vehicle to run on contaminated brake fluid

Your brakes may have a sealed system, but it doesn’t mean dirt and debris won’t make their way into the fluid. You should also pay attention to the seal, as the smallest crack or hole can give air, moisture, and condensation a way in, which leads to contamination.

Continued use of worn-out brake pads

Excessive brake pad wearing also causes the pedal to lower, which compromises the brake system and puts you in harm’s way. Have it replaced with a new one before it wears out completely.

Don’t let your malfunctioning brake system put you in danger. Contact a service technician to ensure that your brakes are working properly.